ARBOR PRESS PLP3XT - 0.75 TON
The Clarendon Arbor Press PLP3XT has been designed and manufactured in the UK for general bench presswork where no specific tools are required. This hand operated 0.75 ton press can be used for staking, riveting, installing and removing bearings and other press fit work.
Clarendon by WEC's full range of presses have been designed and manufactured in-house using sturdy cast iron bodies and rack and pinions machined from high-grade steels. These precision manual Arbor presses will stand the test of time, lasting decades in any harsh workshop environment.
Arbor Press Features:
|Throat Depth (Max) mm||67||105||150||305|
|Capacity Over Table mm||105||190||275||300|
|Largest Table Slot mm||25||30||50||50|
|Load Ratio||14 : 1||30 : 1||34 : 1||30 : 1|
|Ram Diameter mm||22||30||44||44|
|Ram Length mm||175||305||440||440|
|Lever Length mm||130||380||570||570|
|Base Dimensions mm||230 x 100||420 x 150||470 x 210||620 x 205|
|Max Pressure Kgf||350||750||850||750|
|Nett Weight Kg||7||32||65||68|
Particular attention must be given, by the end user, to any mandatory local or national requirements, especially those relating to grinding wheels; the protection of eyes and control of substances hazardous to health.