ARBOR PRESS PLP3 - 0.85 TON
The Clarendon Arbor Press has been designed and manufactured in the UK for general bench presswork where no specific tools are required. This hand opperated 0.85 ton press can be used for staking, riveting, installing and removing bearings and other press fit work.
Our range of presses have been fully designed and manufactured in the UK with sturdy cast iron bodies and rack and pinions machined from high grade steels. These precision manual presses will stand the test of time, lasting decades in any harsh workshop environment.
Arbor Press Features:
| SPECIFICATIONS | PLP1 | PLP2 | PLP3 | PLP3XT |
|---|---|---|---|---|
| Throat Depth (Max) mm | 67 | 105 | 150 | 305 |
| Capacity Over Table mm | 105 | 190 | 275 | 300 |
| Largest Table Slot mm | 25 | 30 | 50 | 50 |
| Load Ratio | 14 : 1 | 30 : 1 | 34 : 1 | 30 : 1 |
| Ram Diameter mm | 22 | 30 | 44 | 44 |
| Ram Length mm | 175 | 305 | 440 | 440 |
| Lever Length mm | 130 | 380 | 570 | 570 |
| Base Dimensions mm | 230 x 100 | 420 x 150 | 470 x 210 | 620 x 205 |
| Max Pressure Kgf | 350 | 750 | 850 | 750 |
| Nett Weight Kg | 7 | 32 | 65 | 68 |
Hi-Spec CNC products are designed and manufactured to comply with all statutory safety requirements in force within the European Union; marked and certified accordingly.
Particular attention must be given, by the end user, to any mandatory local or national requirements, especially those relating to grinding wheels; the protection of eyes and control of substances hazardous to health.
Particular attention must be given, by the end user, to any mandatory local or national requirements, especially those relating to grinding wheels; the protection of eyes and control of substances hazardous to health.